EN
江苏五越实验室设备有限公司

How to maintain the laboratory bench

Author:WuyTime:2024-12-02 16:09:09

1、 The doors and drawers of the experimental bench should be opened and closed gently.

2、 The laboratory cabinet should store ordinary laboratory consumables and equipment. If there are acid, alkali reagents, or volatile solvents, they should be stored in a dedicated safe storage cabinet.

750-600-7.jpg

3、 Firstly, when scrubbing the experimental bench, a soft cloth should be used. The detergent should be diluted before use. Avoid using abrasive or strong acid cleaning agents, and do not rinse at high temperatures. It is best to prepare warm water and use mild cleaning agents to scrub the experimental bench. For substances that are difficult to remove, hypochlorous acid can be dropped onto the surface of the contaminated corrosion-resistant physical and chemical plate and washed with clean water.

4、 Soluble cleaning agents are not suitable for the cabinet of the experimental bench, and all benzene and resin solvents should not be used as panel cleaning agents.

5、 The experimental platform cannot be moved out of the laboratory and exposed to high temperature and strong light, as this can cause damage to the plating on the surface of the experimental platform, affect its appearance, and shorten its service life; It cannot be placed in a particularly dry place, otherwise it may cause cracking.

750-600-6.jpg

6、 During the use of the alcohol lamp, it should not be placed directly on the experimental bench surface as high-temperature flames can burn the bench surface. The alcohol lamp should be placed on a tripod for use.

7、 After the experiment is completed, the water stains on the Henan experimental table should be wiped off, and all accumulated water in the sink should be drained.

8、 If any utensils are broken, they should be picked up with tweezers and not wiped with a cloth, otherwise it may cause scratches on the countertop.

750-600-3.jpg

9、 Although the ventilated counter surface can withstand high temperatures, it is not recommended to come into direct contact with open flames or high temperatures for a long time.

10、 Although the ventilated counter surface has good corrosion resistance to various chemicals, prolonged immersion and contact may also have certain effects. Therefore, it is recommended that if chemicals drip onto the countertop, they should be removed as soon as possible.

Pre:Reasons for choosing ductless fume hoods

Next:Types of common laboratory accidents and corresponding solutions